No. 5, saic avenue, sme park, caofeidian district, tangshan city, hebei province
       
0315-5073200        
Your Current Position:  JOIN US > Information
  • FA Process

    1 person

    Job description:

    1. Responsible for compiling and organizing the general assembly process standards, processes and templates

    2. Participated in the design of general assembly synchronous engineering, process and process

    3. Responsible for the layout design and review of the general assembly process, the preparation of process design specifications, the estimation of project investment, and the process planning of products

    4. Responsible for the research of vehicle testing technology and on-site installation and debugging technical support

    5. Responsible for compiling, reviewing and participating in the verification of process documents related to product change and quality improvement

    6. Assisted in the analysis of major quality problems and the preparation of countermeasures, and assisted in the countersigning of design changes

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Familiar with relevant national and industrial laws, regulations and standards

    3. Proficient in CAD, CATIA and other drawing software and OFFICE software

    4. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility



  • Tooling design

    1 person

    Job description:

    1. Responsible for the design of tooling and fixtures for new projects

    2. Responsible for the design of fixture for new projects

    3. Responsible for the optimization and improvement of mass production fixtures

    4. Be responsible for the analysis and improvement of processing process to achieve optimization

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Familiar with relevant national and industrial laws, regulations and standards

    3. Proficient in CAD, CATIA and other drawing software and OFFICE software

    4. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility



  • Body Frame Design

    1 person

    Job description:

    1. Responsible for the design and development of body in white system in the whole vehicle development process

    2. Responsible for the preparation of design documents and technical documents of the body frame system, the issuance of product drawings and technical changes

    3. Responsible for the system import and maintenance of the corresponding product design data of the body frame system

    4. Participated in solving design and quality problems in product design and development

    5. Be responsible for the adjustment and teaching of the body frame system. The product of the body frame system refers to, tests and verifications

    6. Cooperate with other departments to complete the qualitative and certification work of new products

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Familiar with relevant national and industrial laws, regulations and standards

    3. Proficient in CAD, CATIA and other drawing software and OFFICE software

    4. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility

    5. Familiar with welding technology and stamping knowledge

    6. Familiar with the performance, structure and manufacturing technology of body system and parts


  • Chassis Design

    1 person

    Job description:

    1. Responsible for the structural development and design of automotive chassis (braking, suspension, steering, transmission, etc.) components.

    2. Responsible for the public relations of chassis technical problems, and provide technical support for on-site technical problems

    3. Responsible for the preparation and modification of the design drawings, technical conditions, technical standards, product details and other technical documents of the chassis system

    4. Responsible for collecting relevant information of chassis products, and making good communication and feedback. Work hard to study the business, improve the level and quality of work.

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Familiar with relevant national and industrial laws, regulations and standards

    3. Proficient in CAD, CATIA and other drawing software and OFFICE software

    4. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility


  • Interior and exterior design

    1 person

    Job description:

    1. Responsible for the development, design and model selection of the interior and exterior trim system in the development process of the vehicle

    2. According to the general layout drawings or customer orders, complete the design of interior decoration drawings, improve the reviewed drawings, create and maintain BOM, track the design problem solving, verification and improvement of the assembly under my responsibility, and ensure the leading design structure and superior performance

    3. According to the feedback from after-sales, market and production about interior decoration problems, analyze the root causes, take the lead to develop solutions, verify the implementation, solidify the promotion, and improve the quality and reliability of products

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Familiar with relevant national and industrial laws, regulations and standards

    3. Proficient in CAD, CATIA and other drawing software and OFFICE software

    4. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility

    5. Familiar with the performance, structure and manufacturing technology of interior and exterior decoration parts


  • Device Manager

    1 person

    Job description:

    1. Responsible for equipment technology and equipment operation management

    2. Responsible for the management of equipment in the responsible area, and try to avoid accidents affecting production

    3. Do well in equipment spot inspection management, and solve problems in time

    4. Organize and maintain the equipment according to the plan to ensure the quality of the equipment

    5. Responsible for equipment operation management and operation statistics in a timely manner, and participate in equipment maintenance, equipment installation and debugging. Participate in equipment acceptance

    6. Make fault analysis and timely arrange maintenance

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above mechanical major fresh graduates

    2. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility


  • Planning And Scheduling

    1 person

    Job description:

    1. Participated in and led the process of sorting out production plan control and production completion statistical report, and followed up the implementation

    2. Arranged production according to the axle loading and delivery plan according to the vehicle pick-up list and delivery list, issued the production plan, and tracked the completion of the plan

    3. Carried out coordination and scheduling of production process issues

    4. Responsible for the supervision, coordination and feedback of the implementation progress of the production plan

    5. Responsible for archiving and management of production planning documents and statements

    6. Organized and promoted 5S management workers on the production site

    7. Provide basic data of production plan assessment and basic data of working hours accounting according to the production plan

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility


  • QA Engineer

    1 person

    Job description:

    1. Manage and control the project schedule, quality, scope and risk according to the department's project management process and method, timely discover the project risks and report to the police

    2. Tracked and coordinated the county's problem list and quality problem list at the site stage

    3. Organized and completed the development review of each stage of the project, took charge of the regular project meeting of ding qi, completed the monthly project report and project summary, and recorded the project performance indicators in the process of the project

    4. Assist leaders to carry out quality rectification and improvement

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above in vehicle engineering or mechanical major fresh graduates

    2. Familiar with relevant national and industrial laws, regulations and standards

    3. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility



  • SQE

    1 person

    Job description:

    1. Responsible for supplier performance evaluation

    2. Responsible for supplier access audit and routine audit

    3. Responsible for continuous improvement tracking of product quality of suppliers

    4. Handling of major exceptions and customer complaints

    5. Responsible for supplier PPAP approval

    6. Responsible for continuous improvement of suppliers

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above fresh graduates

    2. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility



  • Sales Executive

    2 people

    Job description:

    1. Responsible for brand planning and advertising plan

    2. Responsible for the special marketing planning and the marketing planning research of competitors

    3. Responsible for media communication and monitoring, and overall control and implementation of advertising and publicity expense indicators

    4. Responsible for planning and implementation of new product launch conference, product promotion conference, press conference and exhibition

    5. Responsible for printing, issuing and inventory management of product samples, advertising pictures, product operation instructions, warranty manuals, bidding documents. Temporary sample shooting and production

    6. Responsible for the collection of vehicle bidding information in each region

    7. Responsible for the organization and coordination of vehicle bidding in various regions

    Requirements:

    1, more than three years of work experience, can receive bachelor degree or above vehicle engineering, machinery, international trade major fresh graduates

    2. Strong problem analysis and solving ability, communication and coordination ability, teamwork spirit, serious work, strong sense of responsibility


91人妻中文字幕无码专区_无码视频播放一区_精品啪啪一区二区_鲁一鲁亚洲无线码美国A